13'' Long Heat Resistant Gloves, Sold by each- 1 Piece

Wear gloves when and where a reasonable chance exists of your hands contacting something hot enough to cause a burn. The hazard assessment should indicate cases where gloves are required. There are some cases such as glassblowing, where the dexterity required cannot be achieved wearing heavy gloves, but the properties of the materials permit handling them without injury.

check for flaws, tears, holes. The gloves should be a comfortable fit, but not so loose that they fall off. When Removing gloves do not use your mouth to pull off gloves by the fingers. Avoid gripping glove by an area that has just been in contact with a hot object while you are removing it. One acceptable method is to partially remove one glove by pulling on the fingers, and with the fingers in the palm of the partially removed glove pull off the other glove by the fingers. Then the partially removed glove may be shaken from the hand. An alternative is simply to wait for the gloves to cool before removing them.

All gloves must be inspected before every use, for possible holes, tears, weak areas. Reusable gloves should be cleaned after each use if necessary, and stored so that they may dry inside and out. If your hands sweat, it is prudent to wear a light disposable under reusable gloves to prevent their inside from becoming damp. Most gloves can be cleaned with soap and water, but it is best to follow the manufacturer's instructions if available. The useful life of reusable gloves will vary drastically depending on the frequency of use, the kind of use, and the conditions of cleaning and storage. Used gloves can be disposed of as regular trash unless they have been contaminated with some hazardous material.

Features and Further Details