The Detail configuration of the our Earmuff

Total 6 Layers of sound proofing before it gets to your ear
Industrial grade – Premium quality - Engineered to last
Snug reliable fit - keeps our ear muffs on your head while you are mowing, shooting, operating machinery, doing landscape work, construction, hunting, watching fireworks, NASCAR, sports events, gun ranges, traveling and concerts.
Proprietary technology
- permanently welds the shell to our engineered Ring - preventing sound leakage into the ear cup.
- Shell - Engineered to reflect sound off the ear cup (about ¼ inch thick).
- 6 layers of our proprietary noise-dampening foam that work together to absorb different bands of sound frequencies.
- Comfort
- Our padded headband provides long-wear comfort.
- The adjustable headband has an additional 1 ¼ inch of vertical adjustment to fit large and small heads.
- Each cup tilts and swivels for a custom fit.
- “Super Soft” foam cushions add comfort and a better seal around your ears.
Application: shooting, airport, construction, sleeping, sporting events, racing, large crowds, machinery, woodworking, ear protection

TEST RESULT: NRR 26dB up to 125dB
- Lab Code 100427-0
- Attenuation measurements have been performed according to the American National Standards Institute (ANSI) Specifications, using the experimenter-fit protocol, on the G&F Products Model 12010/BL, 12010/BU earmuff (test ID Q3991A). The specified threshold measurement data were obtained using ten normally-hearing listeners, six male, and four female. These listeners were selected from a standby group of about 35 volunteers who regularly serve as listeners for measurements of this kind.
- The measurements were made in a room designed for this purpose. All acoustic characteristics of the room meet the requirements outlined in ANSI. The ambient noise levels in this room are below the limits specified in ANSI, and open ear thresholds are used on a continuing basis to monitor the background noise levels. An automatic recording attenuator was used to record both open and occluded ear thresholds.
- Each of the ten subjects was tested three times at each of nine test frequencies. The attached Tables show grand mean attenuation values in decibels (dB) for each test signal along with group attenuation values. Standard deviations (S.D.) for the 30 different attenuation determinations for each test signal are also given. The results presented in this report pertain to the samples tested only.
- Michael & Associates is accredited by the National Institute of Standards and Technology (NIST) National Laboratory Accreditation Program (NVLAP) for tests performed according to ANSI AS/NZ and EN352 parts 1-8. These accreditation criteria encompass the requirements of international standard ISO 17025. This report may only be reproduced or transmitted electronically in its’ entirety. This report shall not be used to claim product endorsement by NIST, NVLAP or by any agency of the U.S. Government. All measurement equipment is calibrated with instrumentation traceable to the NIST.
Disclaimer: Use these laboratory-derived attenuation data for comparison purposes only. The amount of protection afforded in-field use is often significantly lower depending on how the protectors are fitted and worn.
Date: 4/16/2019 by Michael & Associates is accredited by the National Institute of Standards and Technology (NIST) National Laboratory Accreditation Program (NVLAP)
WHY DO WE NEED NOISE REDUCTION EARMUFFS ?

here is the Answer
People should wear a hearing protector if the noise or sound level at the workplace exceeds 85 decibels (A-weighted) or dBA. Hearing protectors reduce the noise exposure level and the risk of hearing loss.
If hearing protection is required, then a complete hearing conservation program should be implemented. A hearing conservation program includes noise assessment, hearing protector selection, employee training, and education, audiometric testing, maintenance, inspection, record keeping, and program evaluation.
The effectiveness of hearing protection is reduced greatly if the hearing protectors do not fit properly, if they are worn only periodically, or if they are removed even for a short period of time. To maintain their effectiveness, hearing protection should not be modified. Radio/music earphones or headsets are not substitutes for hearing protectors and should not be worn where hearing protectors are required to protect against exposure to noise.
Select hearing protection that is:
- Provides adequate protection.
- Compatible with other required personal protective equipment, or communication devices.
- Comfortable enough to be accepted and worn.
- Appropriate for the temperature and humidity in the workplace.
- Able to provide adequate communication and audibility needs (e.g., the ability to hear alarms or warning sounds).
|
|
|
|
---|---|---|---|
The Headband design
|
Applicationshooting, airport, construction, sleeping, sporting events, racing, large crowds, machinery, woodworking, ear protection |
The Advantage
|
The Rate NRR or SNRThe NRR, or other similar systems such as the single number rating (SNR), is a method to more accurately determine the effective exposure of a person when wearing a hearing protector. These rating systems attempt to estimate the actual sound protection provided by hearing protectors when worn in actual working environments (vs. laboratory testing situations). The “real world” results are often different than laboratory tests with the main reasons for this difference being poor fit, and lack of proper training, supervision and enforcement. For these reasons, training on the correct fit, and making sure users have a thorough understanding of hearing loss are important elements of the hearing conservation program. |